GENERAL INDUSTRY ACTIVITY

Brief information about the product range:

Articles made of beryllium:

vacuum-tight beryllium foils with a thickness of 20 microns featuring brushed and polished surface;

beryllium x-ray windows of various shapes with a diameter of up to 100 mm on flanges made of various materials (stainless steel, vacuum-fused copper, etc.);

x-ray lenses made of refractive beryllium with curvature radius of 100 to 2,000 microns;

devices made of nanoporous beryllium intended to eliminate the speckle from synchrotron radiation beam images (speckle suppressors).

Metallurgy:

High-energy magnetic materials based on the Nd-Fe-B system;

Sintered magnets based on strip-casting alloys;

Isotropic pressed rubber ferrites based on fast-quenched powders;

Anisotropic casted rubber ferrites produced using HDDR technology.

Long-length low-temperature superconducting strands based on Nb3Sn compound with a diameter of 0.5 to 2 mm and a critical current density per section (without copper) of 600-2,500 A/mm2 (12 T; 4.2 K);

Long-length low-temperature NbTi strands of any type (for accelerator equipment, medical NMR scanners, devices operating at industrial frequency currents, etc.) with the critical current density of 2,700 to 3,200 A/mm2 (5 T; 4.2 K);

Metal tapes/substrates up to 1,200 m long for the application of functional layers in the production of HTS-2. Used material is 13cr25ni18 grade stainless steel with a roughness level of less than 10 nanometers;

Bars, plates, pipes made of refractory materials and alloys, hard-to-deform metals and alloys, structural steels, functional materials, non-ferrous metals and alloys;

Metal ingots based on:

copper-nickel alloys, manganese, yttrium, etc., as well as tin (14-16%) alloys for the manufacture of superconductors based on Nb3Sn compound;

alloys of copper with niobium and vanadium, for the manufacture of high strength and electrical conductivity conductors (Cu~ 18% Nb, Cu ~ 12.5% V);

niobium-zirconium alloys (Nb-1?1.5 Zr), and the superconducting niobium-titanium alloy (Nb~ 47% Ti);

vanadium-tungsten alloys (VC 10% W);

alloys of vanadium with titanium, chromium (VTX4-4), heat-resistant alloys with tungsten, zirconium, carbon and oxygen;

zirconium-yttrium alloys (Zr~ 15% Y) for the manufacture of targets for HTS-2;

nickel-tungsten alloys (Ni~ 13-20%) for the manufacture of tapes/substrates for HTS-2;

high-purity copper with RRR ~ 300.

Produced equipment:

Drilling mud and oil sludge processing plants;

Installations for cleaning radiologically contaminated soils;

Installations for gas-air cold spraying (CGS), including robotic systems;

Installations for the production of metal powders by centrifugal atomization.

Targets for the deposition of multifunctional coatings:

Ceramic targets of various shapes and sizes for deposition of functional layers used in the the production of 2Gen high-temperature superconductors (2-GHTS). Target material: YBa2Cu3Ox (Y-123), GdBa2Cu3Ox (Gd-123), CeO2, Y2O3;

Metal targets of various shapes and sizes for the application of the YSZ buffer layer in the production of HTS-2. Target material: Zr-Y alloy.;

Mosaic targets (Cu-C, Cu-W, W-C);

Metal targets (Cu, Al, Ni, Ti, Cr, Mo, V, Ta, Nb, Zr, Hf).

Advanced products:

Filter elements including those with a metal-composite membrane allowing for ultra-fine filtration and have the holding capacity of less than 50 microns;

Distilled metallic scandium with the purity of 99.99 to 99.999%;

Products impregnated with hydrogen isotopes (deuterium and tritium);

Reference samples of various approval levels;

Certified objects;

Metal powders for 3D printing;

Hydrogenated titanium pellets (biological protection);

Hydrogenated zirconium disks.